Templates

Caring for your tinted windows is not a difficult process. However, if you want to ensure that your window tinting lasts a long time, you should follow some basic care steps.
Keep in mind that tinted window films take several days to completely cure. Moisture that remains between the window film and the glass after installation can cause a smoke appearance or little water bubble. After this moisture has evaporated, your tinted windows should have excellent clarity.
We recommend that you wait a week after window film products have been installed before cleaning. After a week, use a window cleaner that is ammonia-free and a soft cloth or rubber squeegee. Mr Tint recommends cleaning with baby shampoo, as they are mild and are usually chemical free. Never scrape window film with any type of blade. This will scratch the film. Using compatible cleaners with a microfiber cloth will ensure you do not accidentally damage your window tint during the cleaning process.
Damaged window film could not be fixed, but the damaged piece of film can be removed and replaced. If your window tinting has become damaged, contact Mr Tint to sort it out for you.
We list some of the most common questions we are always asked.
If you have any questions regarding the window tinting, you can find us at contact us page.
A: It really depends on your type of vehicle. A complete car can take 2 to 4 hours. For example, 4 doors sedan with full tints normally take within two hours. Two front doors usually only take 30-45 minutes. If old aftermarket film has to be removed, that can add anywhere from 30 minutes to half a day.
A: If you choose to use our 3M brand window film, we promise you that the film against bubbling, peeling or discoloring for lifetime. Yes, it is lifetime warranty.
A: We recommend that you leave your vehicle windows rolled up for at least 24 hours after window film has been installed. This allows the film to cure and adhere to the glass before the window is moved.
A: The only overlays allowed on windscreens are: anti-glare bands that extend no lower than the bottom of the sun visors when folded against the windscreen (no print allowed below 100mm from the top of the windscreen)
Front two windows fitted with transparent overlays must have an overall VLT of at least 35%.
Film applied to a rear window (windows behind the driver’s seat) of a car (MA CLASS) must have an overall VLT of at least 35%.
Film applied to a rear window (windows behind the driver’s seat) of a car (MC CLASS) may be of any tint level.
If you are not sure about what is the darkest legal tint on your car, please call us.
A: Mr Tint only installs window film on vehicle inside. We need enclosed place to control the wind and dust; we also need a big room to open the doors fully. So we recommend you come to our workshop to finish the job. If you have big and enclosed place, we can do the jobs on your site.
A: Yes. However, having this level of window film on front doors is not legal in New Zealand. Vehicle factory window tint is usually 26%-15% film level. By New Zealand law that the front door legal light transmission is 35%, which is lighter than the rear window of your factory tinted vehicle.
A: Window film creates a more comfortable environment through consistent climate control by eliminating “cold wall” and “hot wall” problems. Rooms stay more comfortable in the summer and winter, be reducing “hot spots”, no matter where the sun is shining.
A: In summer, window film reflects the hot sun, reducing heat gain and lowering air conditioning costs. In winter, window film retains heat — up to 15% — to reduce heating costs. This year-after-year reduction in energy costs can yield an impressive return on investment.
A: “One-Way Film” is based on lighting, not the film itself. The side that is the brightest is the side that you can see. During the day when it is bright outside, you can see outside. At night, if you have lights on inside and no lighting outside, then it reverses.